ENVALITH

SEIKOH GIKEN Co., Ltd. 2Q Earnings Call Flash

Fully Automated Assembly to Meet Customer Request for 2M-Unit Monthly Optical Connector Capacity; Shorter Polishing Machine Lead Times and CPO Technology Development Positioned as Next Growth Drivers

PublishedNovember 17, 2026 at 14:01 GMT+9

Summary

In 1H FY3/2027, revenue and profit at every level hit record highs for an interim period. Profits also exceeded the upwardly revised plan announced on August 10. On the call, management said it plans to double monthly optical connector capacity from approximately 1M units to 2M units at customers' request. It also stressed the need to cut polishing machine lead times, which have stretched to six months. Management expects data center demand to keep expanding over the next one to two years. However, it sees uncertainty in growth rates toward 2030 and has made CPO a key agenda item for the next medium-term plan. The Precision Machinery Division also grew on automotive molded products and molds, so both segments posted higher revenue and profit.

Key Points (Earnings Takeaways and Growth Initiatives)

  • Management Strategy and Market View
    • Management expects the data center market to keep growing at its current rate for the next one to two years. Beyond 2030, it said no one, customers included, has a clear answer
    • Management cited customers' view that the current growth rate will be hard to sustain. However, they do not expect demand to collapse to zero as it did in the 2000 dot-com bubble
    • Management highlighted the company's dual equipment/components profile. Polishing machines peak early, ahead of customers' capex, while connector demand persists long after the equipment comes online
    • For the next medium-term plan (four years to 2030, due May 2027), the company is exploring ways to apply its micro-scale, ultra-precision positioning technology to CPO
  • Current Business Progress and Drivers
    • The decline in 2Q OPM was mainly due to provisions for performance-linked bonuses. A higher revenue mix of optical connectors, which carry lower margins than polishing machines, also weighed
    • Optical product orders fell QoQ in 2Q, but there was no specific cause. Orders remain strong for July–September at overseas subsidiaries and October–November at the head office
    • US customers are the strongest, with orders also coming from their plants in Poland, Mexico and Southeast Asia. China ranks second
    • Profit growth in the Precision Machinery Division reflected a lower material cost ratio. A shift in cost burden to the Optical Products Division, driven by the revenue-based allocation of shared costs, also contributed
  • Key Strategic Initiatives and Inflection Points
    • Customers have requested a 2M-unit monthly optical connector capacity, versus approximately 1M units currently. The company will meet this by shifting from manual assembly to in-house-built fully automated assembly equipment
    • Polishing machine output is up 1.5x vs. the end of the previous fiscal year but remains insufficient. The company is building a partner network, including outsourcing, to raise output beyond its in-house capacity
    • The company has launched a new automated polishing system targeting customers' need to cut labor in polishing processes that require 100–200 workers per plant. It aims to capture polishing machine replacement demand
    • Full-scale mass production of fan-outs for OCS is underway at the Hangzhou plant, with shipments to US customers. MT fiber arrays for current-generation transceivers are also contributing to revenue

Outlook and Strategy

  • Full-year guidance was raised to revenue of JPY 44,000M (+46.2%) and operating income of JPY 14,000M (+81.0%). 1H operating income represents 43.5% progress against the full-year plan (our estimate)
  • The Optical Products Division's full-year revenue plan of JPY 33,500M breaks down into Optical Communication Components at JPY 14.1B (+JPY 1.2B vs. the August plan) and Manufacturing Equipment & Systems at JPY 19.3B (+JPY 1.8B)
  • 2H assumptions imply approximately JPY 7.9B for Optical Communication Components and approximately JPY 11.2B for Manufacturing Equipment & Systems (our estimate). The plan is weighted toward equipment
  • The capex plan was kept at the initial level of approximately JPY 1.9B, with potential upside. 2H spending will again focus on automated assembly equipment and molds for new optical connectors
  • The Precision Machinery Division is accelerating mass-production development of microfluidic devices for life sciences. It won several in-mold coating system orders in 1H and is preparing mass production of PCU components for EVs and HEVs
  • The annual dividend is JPY 30 (interim JPY 15, year-end JPY 15), up JPY 10 YoY. The company maintains its progressive dividend policy and is also investing in cybersecurity and revising its HR system

Positive Factors

  • The Optical Products Division's OPM rose to 38.1% from 30.7% a year earlier. Capacity expansion for polishing machines and measurement equipment drove the margin improvement
  • Polishing machine output rose 1.5x vs. the end of the previous fiscal year. Output of Intelli-Cross PRO for North American data centers rose 5x over the same period
  • DATA PIXEL upgraded its cleanroom and expanded floor space, raising headcount from 37 to 54. It has also secured backlog extending beyond March 2027
  • A one-stop structure covers everything in-house, from optical connectors to polishing machines and end-face inspection equipment
  • Operating cash flow was JPY 4,055M (vs. JPY 1,141M a year earlier), lifting cash and deposits to JPY 14,005M. The net assets ratio stands at 81.5% (our estimate)
  • The stock was newly added to the TOPIX. Following a stock split, the shareholder count doubled from 5,137 to 10,370, driven by retail investors

Concerns and Risks

  • Polishing machine lead times are about six months, longer than the usual two to three months. Customers have alternative suppliers, and the company itself acknowledges the risk of losing orders
  • As capital equipment, polishing machines tend to peak ahead of customers' investment cycles. Any data center capex slowdown would hit this business first
  • The President himself has voiced concern about growth rates from 2027 onward. The shift to CPO will require a transition in product technology
  • A higher optical connector mix tends to dilute margins. Wider use of outsourcing also poses quality and cost control challenges
  • Demand is concentrated among US customers and in China. Expanding mass production at Chinese sites and the joint venture carry geopolitical risk
  • The Precision Machinery Division's 2H OPM plan of 10.4% implies a decline from 12.4% in 1H

Performance Highlights

In 1H, revenue was JPY 19,572M (+61.3%), operating income JPY 6,090M (+120.9%) and interim net income JPY 4,481M (+101.0%), all record highs for an interim period. Operating income beat the JPY 5,500M plan announced on August 10. The Optical Products Division generated roughly 90% of profit, as growing data center demand drove results.

Segment Results

SegmentRevenueYoYOperating IncomeYoY
Precision Machinery DivisionJPY 5,291M+8.1%JPY 656M+23.4%
Optical Products DivisionJPY 14,281M+97.3%JPY 5,434M+144.3%
Consolidated TotalJPY 19,572M+61.3%JPY 6,090M+120.9%
  • Orders Received (Consolidated): JPY 27,648M (+81.5% YoY)
  • Optical Products Division Orders Received: JPY 22,117M (+112.8% YoY)
  • Order Backlog (Consolidated): JPY 17,689M (+136.4% YoY)
  • Optical Products Division Order Backlog: JPY 16,149M (+162.0% YoY)
  • Optical Communication Components Revenue: JPY 6,147M (+125.9% YoY, our estimate)
  • Manufacturing Equipment & Systems Revenue: JPY 8,094M (+81.9% YoY, our estimate)
  • Molded Products Revenue: JPY 4,717M (+6.2% YoY, our estimate)
  • Capex: JPY 873M (+114.2% YoY)
  • R&D Expenses: JPY 392M (+34.8% YoY)

Q&A List

  • Q

    On orders (page 6 of the materials), 1H orders grew, led by optical products. However, splitting 1Q and 2Q, 2Q appears to have slowed somewhat. What was behind this?

    A

    As you point out, optical product orders declined slightly in 2Q vs. 1Q. However, orders have been very strong since the start of 3Q, and there was no particular cause. It was simply a matter of timing, and we are not overly concerned.

  • Q

    You mentioned current conditions are very strong. Is the trend likely to turn upward again from 3Q? Please explain the background as well.

    A

    For overseas subsidiaries, July–September orders fall into 3Q, and actual results are already in: orders are very strong. At the head office, October and November also remain very strong. We expect this to continue into 2H.

  • Q

    Backlog has swelled, so I assume you will keep expanding capacity in 2H and beyond, as in 1H. How much do you plan to increase capacity for optical components, optical polishing machines and DATA PIXEL, respectively, from end-September to next March? A rough sense, such as 1.5x, 1.2x or 2x, is fine.

    A

    Our Matsudo optical connector operation can now produce about 1M units per month, but customers have asked us to double that to 2M units. This is no longer a process we can handle by adding staff for manual assembly, so we are building fully automated assembly equipment in-house. We will expand this to build out production. We have raised polishing machine capacity 1.5x, but it is nowhere near enough. Since we lack sufficient capacity unless we go beyond what we can do ourselves, we will expand further through a partner network that includes outsourcing. It is hard to say by how much at this point, but we will increase capacity further. For DATA PIXEL, we are expanding factory space, including through leases. With backlog extending beyond next March, we will raise capacity so that we can serve customers without causing them problems.

  • Q

    I understand you plan to announce your medium-term plan next May. This year and next should be fine, but there is undeniably concern and skepticism in the market about data center investment. How will you factor this into the next three- to four-year plan? It must be a difficult question, but I would like to hear the President's thinking.

    A

    That is a very tough question, but you are exactly right. I, too, believe data centers will keep growing at the current rate over the next one to two years. On what happens from 2030, I often ask customers, but no one has an answer. What they generally agree on is that sustaining this growth rate will probably be difficult. Even so, they do not expect demand to collapse to zero as in the 2000 bubble. Customers see the data center market as one that will keep growing reasonably well, even with plateaus in the growth rate. So while we have concerns about growth rates from next year onward, we believe demand remains robust. Beyond that, we are entering a very difficult phase, and CPO will be the focus. We are exploring how to collaborate with customers and supply products to customers further upstream. We excel at very fine, ultra-precision positioning, and we hope to find opportunities to apply this in CPO. It is hard to say how much of this we can build into the medium-term plan, but we are working on it every day.

  • Q

    You announced full-year capex of JPY 1,963M at the start of the year. Have you revised this figure?

    A

    We disclosed a capex plan of JPY 1.9B at the start of the year. Capex activity is currently quite brisk, but we have not changed the plan for now. Actual spending may end up exceeding it, but we have not changed our outlook.

  • Q

    In 1H you invested in automated assembly equipment for optical connectors and molding machines, among others. Where do you plan to invest in 2H?

    A

    In 2H, production capacity is still insufficient, so we will continue adding automated assembly equipment for optical connectors. Customers have also approached us about new optical connectors, so we will mainly invest in production equipment such as additional molds for those. Investment content should not change much from 1H, and we do not expect this investment to shrink.

  • Q

    Please describe order intake by region, for both 1H results and current conditions. Please also comment on the regional outlook, e.g., China, major US customers and Japan.

    A

    We do not track orders by region numerically, so I will give you our sense. US customers are very strong, for both polishing machines and connectors. However, US customers have plants worldwide, and we have customers in Poland in Europe, Mexico in Latin America, and Southeast Asia. Orders for polishing machines and measurement equipment are coming in from those regions as well. In China, orders from US customers with plants in China are very strong. Orders from local Chinese connector manufacturers also remain strong. Overall, the US is strongest, followed by China.

  • Q

    With very strong orders and rising capacity, have you been able to shorten lead times for polishing machines and measurement equipment? I believe they are about six months. Please explain the situation.

    A

    As you note, polishing machine lead times in particular are about six months. When we receive orders now, customers ask us to somehow deliver within this fiscal year, but we currently cannot meet that. Our normal lead time has been about two to three months, so we need to bring it back to that level through capacity expansion. Customers have other options, and orders will not necessarily come to us. We have reached the point where we must first shorten lead times that have stretched to about six months.

  • Q

    Uncertainty in the external environment, including AI investment, is rising, but I understand the direction is still upward even if growth slows. Earnings have grown sharply in the few years since you became President, and market expectations have risen. You raised guidance twice this year. Can you sustain revenue and profit growth over the next three years? Is there no peak in optical yet? In mountain-climbing terms, how far up are you? I would like your gut feel, including your resolve.

    A

    It is hard to answer, but if you ask how far up the mountain we are, I would say we still have a long way to go. However, our challenge is that polishing machines are capital equipment. Customers' plant investment translates into polishing machine orders, so they grow first and peak early, which is typical of equipment. Connectors, by contrast, flow once manufacturing equipment is in place, so demand lasts longer, which is typical of components. We have both profiles, and the picture looks quite different depending on which one you focus on. Our priority is to pursue customer requests thoroughly. Within polishing machines, customers are also asking for a new product, an automated polishing system. Production based on polishing machines requires 100 or 200 workers at a customer's plant, and customers want to reduce this with automated polishing systems. We want to serve customers who wish to invest, including in polishing machine replacements. My answer is: we will do our best.

  • Q

    The full-year revenue plan for optical products has been raised to JPY 33.5B from JPY 30.5B previously, I believe. The prior annual plan was about JPY 12.9B for Optical Communication Components (mainly connectors) and about JPY 17.5B for Manufacturing Equipment & Systems (mainly polishing machines). How has each changed with this JPY 3B revision? Even a rough idea would help.

    A

    The revised revenue plan for the Optical Products segment is JPY 33.5B. Of this, Optical Communication Components is JPY 14.1B, up JPY 1.2B from the plan revised in August. Manufacturing Equipment & Systems is expected at JPY 19.3B, an upward revision of JPY 1.8B from the previous JPY 17.5B plan.

  • Q

    That implies connectors at about JPY 8B in 2H vs. JPY 6,147M in 1H, and equipment at about JPY 11B in 2H vs. about JPY 8B in 1H. Will next year look similar? Growth may slow three years out, but since you are currently trying to meet customer demand as much as possible, can we assume substantial revenue growth next year as well?

    A

    That is difficult to answer. It depends on how things play out with the current backlog. We will do our best.

  • Q

    This is further out, but I would like to ask about the CPO work on page 22 and the OCS on page 18, which transmits signals between servers while keeping them optical. Without these, power consumption will rise. My sense is full-scale shipments will come around 2030. Is that right?

    A

    Fan-outs are already in full-scale mass production at our Hangzhou plant. MT fiber array modules are also shipping in volume. These are not CPO per se; they are modules built into current-generation optical transceivers used ahead of CPO. Both are in production and contributing to revenue. As you point out, how we supply products for CPO going forward is a major challenge for us.

  • Q

    Is OCS further out? Or are volumes already shipping and starting to show up in results?

    A

    OCS is used between servers in data centers, is already in use, and is shipping in volume. We mass-produce it in China and ship from our Chinese plant to US customers.

  • Q

    Please break down 1H orders received in the Optical Products Division into Optical Communication Components and Manufacturing Equipment & Systems.

    A

    We do not disclose specific order figures by product, so I will give only a general impression. We see 1H orders as roughly 60% Manufacturing Equipment & Systems and 40% components.

  • Q

    Have orders for Manufacturing Equipment & Systems continued to rise since October?

    A

    Current conditions are very strong. For equipment and capital goods as well, I believe we will continue to receive plenty of orders going into 2H.

Disclaimer

ENVALITH, INC. ("ENVALITH") provides exclusive research coverage services to domestic and international institutional investors, as well as domestic individual investors, with the objective of contributing to the development of global and Japanese capital markets by providing information necessary for considering investments in Japanese listed companies.

  • Purpose and Disclaimer Regarding Investment Decisions

    This report has been prepared solely for informational purposes and does not constitute a solicitation to acquire, sell, or hold securities or any other financial products. Furthermore, this report does not constitute specific investment, financial, or tax advice. Any opinions, judgments, or recommendations contained herein are not intended to induce investment activities. Please be advised that all investment decisions must be made based on the investor's own responsibility and judgment, and ENVALITH and subject company shall not be involved in any such investment decisions.

  • Information Sources, Accuracy, and Disclaimer of Warranty

    This report has been prepared based on a formal request from the subject company, utilizing information provided by and interviews conducted with said company. By using this report, you are deemed to have agreed to the following: 1. Information Sources: This report is prepared on the assumption that the publicly available information and information disclosed by the subject company and provided during interviews is true and reliable. ENVALITH has not independently verified or validated the veracity of such information. 2. Accuracy: The interpretations, analyses, and hypotheses or conclusions based thereon contained in this report are independently derived by ENVALITH using its own perspectives and analytical methods based on the information mentioned in the preceding paragraph. 3. Disclaimer of Warranty: In the event that there are errors or omissions in the information disclosed by the subject company, ENVALITH and subject company shall not be held liable for any inaccuracies in this report resulting therefrom. ENVALITH and subject company make no warranties, whether express or implied, regarding the accuracy, safety, validity, completeness, or any other aspect of this report, nor regarding the past or future performance of the subject company.

  • Limitation of Liability

    ENVALITH and subject company shall not be liable for any costs, damages, or losses (including direct, indirect, incidental, consequential, or punitive damages) arising from the use of this report or the information obtained therefrom. Users of this report acknowledge and agree that such use is at their own risk.

  • Potential Conflicts of Interest

    ENVALITH may have, or may have in the future, business relationships with the subject company. Accordingly, investors should be aware that conflicts of interest may exist that could affect the objectivity of this report.

  • No Obligation to Change or Update Content

    The contents and opinions in this report, as well as the information upon which it is based, are current as of the date of preparation and are subject to change without notice. Please be advised that ENVALITH is under no obligation to update the contents of this report, and investors must verify the timeliness of the information on their own.

  • Governing Language

    This report is prepared in Japanese, English, and Chinese. In the event of any discrepancy or difference in interpretation between the language versions, the Japanese version shall be treated as the original and shall prevail.

  • Copyright

    All rights (including copyrights) relating to this report belong to ENVALITH. Any reproduction, redistribution, or other use of all or part of this report without the prior written permission of ENVALITH is strictly prohibited.

  • Use for Other Investment Products

    Except where ENVALITH has provided prior written approval, the use of this report and the trademarks or trade names of ENVALITH or the subject company in connection with the information distribution, transaction, sales promotion, or advertising of any investment products (including derivatives, structured products, investment trusts, or investment assets whose price, return, or performance is based on or linked to this report) is strictly prohibited.